Help anyone! Cant remove pilot rear brake disc. Already removed left axle w/stub but cant get necessary clearance.

If I remember correctly, I had to use a 3 jaw puller........

Are you trying to remove the rear brake disk or the rear brake disk hub? If it's the hub, than a puller is needed. If it's the disk, remove the bolts and it should come right off. Any pics?

Hey there Pilotbird. It's the brake disc im trying to remove to replace it . Got left axle completely removed, brake disc loose but wont clear frame to take it out. Book doent say to remove driven clutch but it seems like that is what is preventing me to push up the disc to get enough clearance to get past frame.

It will come out you just gotta find the right combination and I think you have to remove the driven clutch.

Use loctite on the threads of the bolts when you reinstall them.

Hoser to the rescue!. Thanks for confirming it Hoser. I suspected the driven had to come out even though it doesnt say it in the service manual. Appreciate the reply.

yes you deffo have to take off the driven clutch to get the disc off...