PilotOdyssey.com http://pilotodyssey.com/PO/ |
|
Carb. Rebuild Kit & drive sprocket http://pilotodyssey.com/PO/viewtopic.php?f=1&t=673 |
Page 1 of 1 |
Author: | oddy_fever [ Tue Jun 29, 2004 8:40 pm ] |
Post subject: | Carb. Rebuild Kit & drive sprocket |
Hello everyone, I am new to the group. I have a early 80's FL250 that I am currently restoring. The Engine is at the shop right now getting rebuilt. I was wondering what is the best rebuild kit for the stock carbs. I hope to rebuild the carb over the weekend and was hoping for some assistance from all of you. I currently have the oddy completely tore apart. I stripped the frame and am in the process of repainting. It looks awesome so far. I have gone through the gear reduction unit and found everythign but the drive sprocket to be in good working order. Does anyone know a good place to get one of these? I have found one for 75.00 in California, which seems to be an okay price, but it is used. Thank all of you for your time. THis seemes to be a great group and I am looking forward to being an active member. Oddy_Fever |
Author: | spinergy [ Wed Jun 30, 2004 12:01 am ] |
Post subject: | |
You could try OdysseySalvage.com, Randy Bridgewater is a real good guy and has given me lots of free advice. He has a good set of web pages, and you can call him too, at 913.856.6639. I would try him first, he can get new Honda parts as well as used. Also, I have had good luck from a guy named John Mscisz (not sure of spelling on last name). He can probably get you what you need. Here's his email address: jstop1212@aol.com . Tell him artisanjrf (John Fickle) sent you. If you would feel more comfortable ordering from a Honda dealer, then I'd call Hillside Honda @ 707.263.9000. They are familiar with Odysseys. I haven't personally done any business with them but tsutton44 recommended them to me. If you're going to pay for a new Honda part you may as well buy it there. Hope this helps. |
Author: | Oldmanody [ Wed Jun 30, 2004 12:48 am ] |
Post subject: | |
the carb rebuild kits i have seen don't have the Slide Needle seat included - as a 250 rebuilder :) that had a carb problem i recommend you replace the the slide needle and seat as a set just my thoughts made my 250 an new machine Curtis |
Author: | oddy_fever [ Wed Jun 30, 2004 9:40 pm ] |
Post subject: | |
Thanks for your replies. I am sure I will have more questions, and it is good to know that I have found people willing to help. |
Author: | spinergy [ Wed Jun 30, 2004 10:04 pm ] |
Post subject: | |
np |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |