PilotOdyssey.com http://pilotodyssey.com/PO/ |
|
350 bolt on front suspension http://pilotodyssey.com/PO/viewtopic.php?f=123&t=14867 |
Page 2 of 3 |
Author: | redskinman [ Mon Jul 20, 2015 5:10 pm ] |
Post subject: | Re: 350 bolt on front suspension |
bump |
Author: | halorising [ Fri Aug 28, 2015 11:22 am ] | |||
Post subject: | Re: 350 bolt on front suspension | |||
This project got put on hold for a while but it is back on full time. It's looking sweet
|
Author: | bl1tzkr13g [ Fri Aug 28, 2015 8:50 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Nice let me know when that front suspension is complete so I can come over and see it in person! |
Author: | wyeeoddy [ Fri Aug 28, 2015 10:00 pm ] |
Post subject: | Re: 350 bolt on front suspension |
halorising PM sent Yeoddy |
Author: | halorising [ Sat Sep 05, 2015 1:12 pm ] | |||||
Post subject: | Re: 350 bolt on front suspension | |||||
It's almost done!!!
|
Author: | halorising [ Sat Sep 05, 2015 1:17 pm ] |
Post subject: | Re: 350 bolt on front suspension |
when he started building this setup he asked me how wide I wanted to go on the front end and I said I didn't want to go much wider than the back end. I'll have to go back through the notes and see how wide this thing is I kind of remember 52 inches but I'll look to make sure. With it set up with the 450 Shox and keeping the Shox under the fenders it's only getting about 7 inches of travel. With 10 available. We had a choice of moving the lower shock mount down or pushing the upper shock mount through the fenders |
Author: | canadian oddy [ Sat Sep 05, 2015 3:30 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Are going to be able to use the stock foot tub ?? That picture of the steering linkage may be a bit deceiving as it looks like it might interfere with the foot tub. |
Author: | halorising [ Sun Sep 06, 2015 2:50 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Yup, the stock foot tub will fit |
Author: | halorising [ Thu Sep 10, 2015 10:32 am ] | |||
Post subject: | Re: 350 bolt on front suspension | |||
Ended up with 9"of wheel travel
|
Author: | fully [ Thu Sep 10, 2015 12:51 pm ] |
Post subject: | Re: 350 bolt on front suspension |
you'll be cutting the fender and the foot tube with those upper shock mounts. and they don't look like they would be very sturdy. |
Author: | adnoh [ Thu Sep 10, 2015 2:12 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Assume job, cant wait for a ride report. The increased lever ratio on the stock 450 shock should soften them up. |
Author: | emmanuel farrugia [ Thu Sep 10, 2015 5:16 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Im going to be offering two styles of upper shock mounts, one with a shock tower on the suspension itself with no mods to the fenders or like in the picture but there will be a brace from side to side in the production model. Price on these kits is 1200 usd for everything but the shocks. |
Author: | consol [ Fri Sep 11, 2015 12:00 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Awesome job I hate to be an armchair Qb , but it might help to make the shock mounts with a larger surface area clamp, especially the upper Spread the load out a little better |
Author: | wyeeoddy [ Sat Sep 12, 2015 1:03 am ] |
Post subject: | Re: 350 bolt on front suspension |
emmanuel farrugia It has come up looking awesome. Just throwing this out there. Can you supply the sub frame with loose a-arm tabs so you can use a range of stock arms and the buyer welds the tabs to suit there own arm set up. They will also need to supply there on tie rods PM sent |
Author: | wyeeoddy [ Sat Sep 12, 2015 10:07 am ] | ||
Post subject: | Re: 350 bolt on front suspension | ||
I was having a closer look at the pics I would it be a option to add a brace @ the rear of the sub frame to meet up the the main oddy frame as it would add to your mounting points and remove some flex Just a suggestion see pic
|
Author: | emmanuel farrugia [ Wed Sep 23, 2015 7:15 pm ] | |||||||
Post subject: | Re: 350 bolt on front suspension | |||||||
Good eye on the foot tub, the bolt for the antibumpsteer was just touching the tub, I had forgotten how much it dropped down. I modified the bracket to get the clearance. I also added a brace in the back but I am going to do a little stronger brace now that im going to put the shock mount on the suspension itself that way there will be no mods to the plastics. I also made the bumper bolt onto the subframe
|
Author: | emmanuel farrugia [ Wed Sep 23, 2015 7:24 pm ] |
Post subject: | Re: 350 bolt on front suspension |
What do you guys think of me putting together a set of plans so people can fabricate what they want and being able to buy the parts they don't want to make or cant, I know money is tight especially for toys for a lot of people so this might be a good option |
Author: | canadian oddy [ Wed Sep 23, 2015 7:24 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Nice very nice. On a negative note I don't like that mickey mouse rigging. Looking at 015jpg if that hoist chain slips past the mouse on the hook your gona lose a finger or break your arm. Wrap that chain around the hook one time or better yet use a sling. JMO. |
Author: | canadian oddy [ Wed Sep 23, 2015 7:25 pm ] |
Post subject: | Re: 350 bolt on front suspension |
emmanuel farrugia wrote: What do you guys think of me putting together a set of plans so people can fabricate what they want and being able to buy the parts they don't want to make or cant, I know money is tight especially for toys for a lot of people so this might be a good option I like that idea. |
Author: | wyeeoddy [ Mon Dec 28, 2015 12:28 am ] |
Post subject: | Re: 350 bolt on front suspension |
Is there a update to this as I and looking at getting a subframe I have a price and shipping but I am keen for a ride report. yeoddy |
Author: | halorising [ Sun Apr 10, 2016 5:41 pm ] | ||||
Post subject: | Re: 350 bolt on front suspension | ||||
This front end kit came out beautiful. And the rear end kit looks like it's coming along really nice. Farr Offroad. Com
|
Author: | fully [ Sun Apr 10, 2016 7:46 pm ] |
Post subject: | Re: 350 bolt on front suspension |
is this finally back at your place, can't believe it has taken this long that is crazy. those axles look pretty dam long |
Author: | mudbogger [ Sun Apr 10, 2016 7:59 pm ] |
Post subject: | Re: 350 bolt on front suspension |
I agree, mine for my project are way shorter, what is the part from? Polaris UTV? |
Author: | go oddy [ Sun Apr 10, 2016 8:07 pm ] |
Post subject: | Re: 350 bolt on front suspension |
Halfway to being ready for an airing out.... The front fenders in their current perch will be rendered useless, real men don't need fenders. Love it! |
Author: | halorising [ Mon Apr 11, 2016 1:34 am ] |
Post subject: | Re: 350 bolt on front suspension |
I believe he was working with rzr 800 axles |
Page 2 of 3 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |