I have bought an old beaten up FL250 from Craigslist. There was not much left of the poor machine, so I stripped it down for parts to rebuild for my current running FL250. So far, I have tooken the rear and front hubs to get sandblasted and powder coated yellow. Now, I have bearing rebuild kits pressed into them, but waiting on some bushings to try, before I finish pressing the remaining bearing and seals in.
Attachments: |
File comment: [color=#BF0000]hubs back from paintshop, laying next to rebuild kits I purchased.[/color]
DSC04505.JPG [ 2.34 MiB | Viewed 684 times ]
|
File comment: [color=#BF0000]Pressed the oil seal into the rear hub[/color]
DSC04508.JPG [ 2.1 MiB | Viewed 684 times ]
|
File comment: [color=#BF0000]Pressed the bearing into the rear hub.[/color]
DSC04509.JPG [ 2.11 MiB | Viewed 684 times ]
|
File comment: [color=#BF0000]Pressed the dust seal into the rear hub.[/color]
DSC04511.JPG [ 1.9 MiB | Viewed 684 times ]
|
File comment: [color=#BF0000]Had an extra front hub to put with the paint order. Started pressing parts into one, but decided to wait on other parts to come to experiment with.[/color]
DSC04516.JPG [ 2.29 MiB | Viewed 682 times ]
|
|