I had posted some discussion on
rppjr Engine so I thought I would go take some pics and video to go along with my ramblings. I mocked up an Engine with out the cases to show the working in degrees of rotation and crank angles. I also took pics of the bench comment of the pilot cylinder. I also took pics of the OEM crushed head gasket. I then took pics of the piston in the cylinder with the cylinder spaced and decked. I even decided to share some pics on the flywheel in degrees as well in relation to the (T) and (F) mark and the piston position. You can see the crank angle as well. Did more however this all I had time to post.
Enjoy the pics and video.