PilotOdyssey.com http://pilotodyssey.com/PO/ |
|
Measuring & Design of odyssey & pilot rear caliper b http://pilotodyssey.com/PO/viewtopic.php?f=46&t=3873 |
Page 2 of 2 |
Author: | speedchaser [ Fri Feb 08, 2008 9:34 pm ] | |||||
Post subject: | New styl steel bracket | |||||
Hello had some time to day worked brackets cutting them out of steel. Changed the design a little. Add some material a round the slider pin holes on the out side. So I could get bronze bushings and rod wiper seals in http://www.mfpseals.com/category.php?id=132 (Metal Clad Wiper – Nitrile) This bracket will be rebuild able and will not use the stock 45131-***-006 bolt pins slider bolts $9.05 each 45133-***-006 boots rubber $2.9 each 45112-***-006 RETAINER, BRACKET spring clips $3.16 each no longer available Replacement parts 2 bronze bushing 4 rod wiper seals 2 custom slider bolts made out of grade 8 allen bolt Weight is only 1 pond more then stock Making this bracket out of aluminum is not a good idea with replaceable bushing the cross-sections is too thin and might brake and I don’t need that. This is guts for the rebuild able style bracket. thanks for looking speedchaser
|
Author: | speedchaser [ Fri Feb 08, 2008 9:40 pm ] | |||
Post subject: | ||||
next pics with bushings and rod wipers will have some pics of slider bolts soon note the sider pin hole go all the way thru the bracket. to keep a good seal and to press out bushing when needed.
|
Author: | speedchaser [ Fri Feb 15, 2008 11:04 am ] | |||
Post subject: | ||||
pic's of new style slider bolt cut out of a grade 12 allen socket head screw thanks for looking speedchaser
|
Author: | Stoneman [ Mon Feb 18, 2008 12:15 pm ] | ||
Post subject: | |||
I installed Speedchasers prototype aluminum bracket on my pilot yesterday. The fit and finish is excellent. I did have to bend the ears of the wear indicator clip in slightly in order for it to snug up to the bracket. All other clips fit perfect. Bolts up to tranny with no problems. I will put some miles on it this weekend and report back.
|
Author: | speedchaser [ Thu Feb 21, 2008 4:23 am ] |
Post subject: | |
movie's of brake bracket cnc machine http://www.youtube.com/user/chasemachine thanks for looking Speedchaser |
Author: | hoser [ Thu Feb 28, 2008 10:21 am ] |
Post subject: | |
Now shipping! viewtopic.php?t=4011 |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |