So I know you need to create a little more clearance when you swap out an Engine. I do like Farr's frame mod kit: https://www.farr-offroad.com/framemodinstructions.htm
Attachment:
farr12.jpg [ 30.36 KiB | Viewed 10242 times ]
Attachment:
farr1.jpg [ 33.26 KiB | Viewed 10242 times ]
I didnt like how the cross tube was cut by the previous owner in front of my recoil. So I decided to make something of my own. I used "Meziere CE13 1-1/8" x 0.083" Weld-In Clevis." It fits the inside of the tube perfectly, and I used 1" wide, 3/16'' bar. There is a gap in the clevis, I will eventually fill that in with a spacer and weld.
Attachment:
crossbar3.jpg [ 61 KiB | Viewed 10242 times ]
Attachment:
crossbar.jpg [ 60.58 KiB | Viewed 10242 times ]