PilotOdyssey.com http://pilotodyssey.com/PO/ |
|
1990 Pilot Refresh http://pilotodyssey.com/PO/viewtopic.php?f=5&t=20703 |
Page 1 of 1 |
Author: | Lehmab01 [ Wed Mar 03, 2021 9:25 pm ] |
Post subject: | 1990 Pilot Refresh |
1990 Pilot recently purchased (at one point redskinman machine). Has long-arm front with Works shocks Has CW racing build (400 head bored to 500, if I understood that right) I'm still getting to know it.. but started with long overdue rebuild of shocks.. that led to front-end.. then rear.. After some research finally figured out is a discontinued long arm kit with rack and pinion (guys used to be out of San Diego) Will post some progress pics.. Thanks to all you that contribute here.. it is very helpful. |
Author: | Garemie [ Thu Mar 04, 2021 11:19 pm ] |
Post subject: | Re: 1990 Pilot Refresh |
"Will post some progress pics.." Please do! I believe the 500 kit from CW was a custom sleeve from LA Sleeve to achieve the 500 bore size. ATV Racing also made a 500 kit that grafted the CR500 jug to fit the FL400 bottom end. Curious what you have there. |
Author: | FL670R [ Fri Mar 05, 2021 2:14 pm ] |
Post subject: | Re: 1990 Pilot Refresh |
Years back I had the same m0t0r in a long travel pilot Stock 400 cylinder punched out and sleeved for a CR500 piston I talked back then with Chris from CW Racing who (if I recall Correctly) said he never built such machines I did a bunch of modifications to keep it running, search this site for Bad500 Dennis |
Author: | Lehmab01 [ Sat Mar 20, 2021 7:21 pm ] | |||
Post subject: | Re: 1990 Pilot Refresh - Front End Installed... BUT... | |||
Well, been long time coming.. but re-installed the front end on the Pilot.. However, I believe the right steering knuckle is bent.. Look at the grease fitting in relation to the wheel. From what I can tell, these are also NOT stock FL400 knuckles.. Anyone have luck bending them.. just a little bit..?
|
Author: | Lehmab01 [ Sat Mar 20, 2021 7:22 pm ] |
Post subject: | Re: 1990 Pilot Refresh - Front End Installed... BUT... |
Lehmab01 wrote: Well, been long time coming.. but re-installed the front end on the Pilot..
However, I believe the right steering knuckle is bent.. Look at the grease fitting in relation to the wheel. From what I can tell, these are also NOT stock FL400 knuckles.. Anyone have luck bending them.. just a little bit..? |
Author: | Lehmab01 [ Sat Mar 20, 2021 7:25 pm ] | |||
Post subject: | Re: 1990 Pilot Refresh - Front Swing-arms and shock | |||
Couple pics of front end back together
|
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |