Will the thinner material be a problem when you're roosted by a few rocks?
Nothing beats 1/4 plate steel!
| PilotOdyssey.com http://pilotodyssey.com/PO/ |
|
| "hoser Enhanced Hood" http://pilotodyssey.com/PO/viewtopic.php?f=71&t=1216 |
Page 2 of 2 |
| Author: | hoser [ Sat Apr 02, 2005 10:46 pm ] |
| Post subject: | |
Close enough, and your worried about getting the bottoms of your legs wet lmao It made my eyes hurt just looking at yours. |
|
| Author: | Ramjet [ Sat Apr 02, 2005 10:50 pm ] |
| Post subject: | |
Will the thinner material be a problem when you're roosted by a few rocks? Nothing beats 1/4 plate steel!
|
|
| Author: | PilotHawK [ Sun Apr 03, 2005 12:34 am ] |
| Post subject: | |
The lexan was is tough enough to handle the crease along the top edge. It was bent on a sheetmetal brake! |
|
| Author: | Ramjet [ Sun Apr 03, 2005 9:36 am ] |
| Post subject: | |
I've got Redrider Lexan Panel on my Pilot too. I like it. It's a pain to clean the foot tub if you drag a lot of mud into it because the panel is in the way. But, it does keep 99% of mother nature off you. On airplanes we use these quick release screws that I'm going to try. Just half a turn and the panel will come off. I recall they're called a Southcal stud. Hey PH, nice decals on the hood.....lol. |
|
| Author: | MassOdy [ Sun Apr 03, 2005 10:34 am ] |
| Post subject: | |
ON my first hood I used lexan also. Heated it and bent it with a hot air gun. Painted the inside. Nice hoods everyone has made. |
|
| Author: | tsutton44 [ Sun Apr 03, 2005 11:16 am ] |
| Post subject: | |
what about the addition of quick release bolts like Ramjet suggests but also a pair of small heavy duty hinges so the hood would flip up for easier cleaning ? |
|
| Author: | hoser [ Sun Apr 03, 2005 11:24 am ] |
| Post subject: | |
tsutton44 wrote: what about the addition of quick release bolts like Ramjet suggests but also a pair of small heavy duty hinges so the hood would flip up for easier cleaning ?
When I wash my Pilot I wash it top side and bottom side, I stand it up like seen in these pictures http://pilotodyssey.com/PO/viewtopi ... light=skid washing the inside of the tub is not a problem gravity does all the work, I see no need for quick fasteners to remove the tub, not that they cant be used, quick release is always good, I would like to see the ones Ramjet is talking about. |
|
| Author: | hoser [ Thu Sep 15, 2005 11:12 am ] |
| Post subject: | |
Anybody have a intrest in a hoser hood? |
|
| Author: | PilotNut [ Fri Sep 16, 2005 12:34 pm ] |
| Post subject: | |
yes |
|
| Author: | hoser [ Sat Sep 17, 2005 12:44 pm ] |
| Post subject: | |
PilotNut wrote: yes
$50.00 donation to this web page plus actual shipping cost. |
|
| Author: | mudbogger [ Sun Sep 18, 2005 7:01 pm ] |
| Post subject: | |
Hey, what about me???I'm back from the depths of the bedroom/hospital room and need some of those enhanced item for my Pilots too!!!! |
|
| Author: | hoser [ Mon Mar 25, 2013 6:46 pm ] |
| Post subject: | |
I will have to see what I can do, I am out of aluminum that's why I was trying to see if their was any intrest in them, I will be buying a sheet of aluminum for other things but if their is enough intrest I will get a extra sheet for the hoods and skids. |
|
| Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|