Welcome
Fl350 rear caliper
1) The dust seal is no longer available -- item 5 in pic
2) The square main seal you can get at Honda. It is from a 1981 CB750K #45215-533-004 -- that's item 10 in pic
3) The small o-ring you can still get from Honda: o-ring: 91358-964-006 -- item 28 in pic
4) The outside boot is a 2000 Chevy rear wheel cylinder boot fits great for a replacement parking brake boot -- picture below item 21 in the pic
Please note that these parts were still available a couple of years ago.
Also I do not run the dust seal because you can't get one and all 3 of my machines have no issues. You don't need it.
Bleeding the brakes will be a pain in the azz so make sure your master cylinder is in good shape.
CO
Edit: start a new thread in the tech section for this issue.
CO
| Attachments: |
|
File comment: This is the outside boot it's a chevy wheel cylinder boot. Apparently it fits but I have never needed one
FL350 brake boot.png [ 605.92 KiB | Viewed 21839 times ] |
|
rear brake caliper.jpg [ 93.21 KiB | Viewed 21839 times ] |