Here are some parts off Pilotmans Pilot Engine, this is his original Pilot not his LT Pilot or the original Pilotman CSI viewtopic.php?t=707


This is suppose to be a ATVR ported top end...

Below is the head, what a mess whoe ever tried to re cut the head must have had alot of problems with the cutter, blue arrows point to the extreme chatter the cutter must have had to make that chatter pattern on the sealing surface, even after me lapping the head the yellow arrows point to low spots that still contain gasket material I could not remove with a razor blade, the pink arrows show a random gouge in the dome area where I bet the machine operator said "oh shit" when the cutter dug into the material
[/url]

Here is the head after removing a few thousands in the lathe and lapping it down.

Here is the piston out of this Engine, good ole wiseco, someone set it up with .0085 (8-1/5 thousands) clearance, even with the extra .0045 clearance it still tried to pull the wiseco patented seize act on this cylinder